The Reverse Curve

The Reverse Curve

 Personally proving to be the most challenging module for me, the torus was an interesting task that helped me understand the challenges associated with achieving symmetry and the importance of symmetry in this task.

Despite the number of times I had failed to correctly form the torus, I was able to achieve some sort of shape by using a rubber mallet to strike a piece of timber to achieve the majority of the shape. Upon completion of this, I attempted to use the English wheel to for a bent appearance.

In addition to this, I used a metal hammer to strike the edges of the torus, to achieve a somewhat more defined and smoother finish.

Comments

Post a Comment

Popular posts from this blog

The Tin

Image
The Tin: In an attempt to create a pair of tins that would sit on top of each other to form something in the likes of a pencil tin, unfortunately I was unable to pair up with a class member to create the pair, however in saying this I was able to adopt a method of formation that allowed for a piece of metal to somewhat take the shape of half of the pencil tin. Proving to be a little more difficult tocreate when compared to the blister, the tin was relatively brittle and broke on one occasion. However, by using a mallet to form the edges of the tin and 'wrap' the metal around the timber mould and again, the back end of a rubber screwdriver to smooth out the edges in the corners of the tine, I was able to produce the below.
Read more

Assignment 3 - Critical Review

Image
Final Assignment 3 For this review, I have chosen to go with critically assessing the most recent project that we were assigned to do, which was the 1/3 of a fuel tank. Despite proving to be the most challenging piece to form when compared to subsequent projects that we were assigned to do, the fuel tank taught me many varying techniques and in different scales to the previous tasks. Amongst the different forming techniques learnt, I had also learnt patience and perseverance when working with metal in such a way. The end result creating a sense of accomplishment and eagerness to repeat the task in order to improve the quality of the outcome. The process of creating the fuel tank was as follows: -        Digitally generating the fuel tank on RHINO and printing in order to create a template to form the sheet metal around -        Cutting the sheet metal in reasonable proportions -      ...
Read more